Getting started
with Elixir.

Install the app, connect your controller, and pick where your input goes.

Install

  1. Sign in with Discord and download the Elixir installer on your Windows PC. The download is for license owners: the first time, enter your key to link it to your Discord account.
  2. Run ElixirSetup.exe and allow the administrator prompt. Click Install; it installs to Program Files\Elixir and adds Elixir to the Start menu (and your desktop, if you keep that box ticked).
  3. Launch Elixir from the Start menu. If Windows asks for administrator permission, allow it so Elixir can access your controller.
  4. Sign in with the same Discord account and enter your license key. Plans start at $1; every plan is a one-time payment.
Check the system requirements first. Windows 10 64-bit is the minimum.

Updates

Elixir updates itself. When a new version is out, it shows on the startup screen and under config › system › updates: click download & install, then restart to install. You can also press check for updates there. Your settings, profiles and models are kept.

Repair or uninstall

Run ElixirSetup.exe again. It detects the installed copy: Verify checks every file and repairs any that are missing or damaged, Uninstall removes Elixir (it asks whether to keep your settings). You can also uninstall from Windows Settings › Apps.

First launch

The first launch needs an internet connection to finish setup. On an NVIDIA RTX card, Elixir offers the optional NVIDIA acceleration pack. It downloads inside the app and takes about 4 GB. See Acceleration pack.

The first time the pack runs, it builds an optimised engine for your GPU in the background. A notification tells you when it's done; you can keep using the app meanwhile.

License & account

Your key is linked to one Discord account and one PC. The first time you sign in to the app (or download from this site), enter the key and it links to the Discord account you're signed in with. After that, signing in with that account is enough.

Offline play

Elixir checks your license every few hours. If it can't reach the server, it keeps working for up to 3 days, then asks you to go online again.

When a key runs out

Elixir shows a notice and closes a few seconds later. Buy another key, or go Lifetime, and enter it on the startup screen. Plans never renew on their own.

Another Discord account or a new PC

On this site, open the download dialog and choose Use another Discord account, or use Sign out in the account menu at the top. A key that's already linked can't be claimed by a different account. To move your key to a new PC or a different Discord account, ask on Discord with your key and the old account name.

Elixir S3

To play on a console, Elixir needs a small adapter between your PC and the console: an ESP32-S3 board running the Elixir firmware. The console sees it as a controller; your PC feeds it over USB.

What to get

An ESP32-S3 development board with two USB-C ports: one native USB port and one serial (COM / UART) port. Boards with a CH343, CH340/CH9102 or CP210x USB-serial chip all work. Use data cables, not charge-only ones.

Set it up

  1. Plug the board's COM / UART port into your PC.
  2. Open config › system and go to the page with this pc. Under S3 firmware, install the USB driver for your board if it shows as missing, then flash the Elixir firmware. Flashing keeps your saved output mode.
  3. Plug the board's native USB port into the console.
  4. On the config tab, set device to Elixir S3, then pick the output the console should see and the report rate.

Elixir finds the board on its own; there's no COM port to pick. If the firmware row says the board needs an update, flash it again from the same place.

OutputShows up as
DualSenseA PS5 controller
DualShock 4A PS4 controller
Xbox Series X/SAn Xbox Series controller
Xbox 360An Xbox 360 controller
Mouse + KeyboardA USB mouse and keyboard

Report rate sets how often the console reads the adapter: 1000 Hz (1 ms) down to 125 Hz (8 ms). Leave it on the default unless a game has trouble with high rates.

Titan Two & Cronus Zen

Already own a Titan Two or a Cronus Zen? Elixir can use it instead of an S3.

  1. Connect the device's PROG port to your PC, your controller to the device's input port, and the device's output to the console, as you normally would.
  2. Close Gtuner or Zen Studio. Only one app can talk to the device at a time.
  3. On the config tab, set device to Titan 2 or Cronus Zen. The device's own settings appear underneath.

Your controller stays plugged into the device, so its input reaches the console directly. Elixir reads the controller back from the device to show it and use your binds.

After switching a Cronus Zen between PlayStation modes, unplug it and plug it back in.

Connect a controller

Plug your controller into the PC over USB or pair it over Bluetooth. Elixir picks it up automatically and shows it in the title bar. While Elixir is reading it, other apps (like the Windows Start menu) stop reacting to it.

ControllerConnectionNotes
DualSenseUSB, BluetoothGyro, touchpad and haptics pass through
DualShock 4USB, BluetoothGyro and touchpad pass through
Xbox Series / OneUSB, wirelessRumble passes through
Keyboard & mouseAnySee Keyboard & mouse below

Pick an output

Choose where your input goes with device on the config tab. Most changes apply straight away, without restarting.

  • Elixir S3: PlayStation or Xbox through the S3 adapter.
  • Titan 2 and Cronus Zen: through a device you already own. See Titan Two & Cronus Zen.
  • PS Remote Play and XBOX Remote Play: stream the console to your PC. See Remote Play.
  • Local Output: PC games on this computer. Pick a Virtual Xbox 360, DualShock 4 or DualSense Controller, or Virtual Mouse + Keyboard. Virtual controllers use the ViGEmBus driver.
  • Disabled: no output at all.

Games may see both your real controller and the virtual one. If a PC game reacts twice, turn off the real controller in that game's settings or Steam Input.

Capture

Elixir watches the game picture. Pick where it comes from under config › system › capture:

  • A capture card: for consoles. Plug the console's HDMI into the card and the card into your PC.
  • A screen: for games on this PC. Pick the monitor the game runs on. Capture pauses while your mouse cursor is on another monitor.
  • None: no picture.

For a capture card you can also set the resolution and frame rate, and the capture method: automatic, media foundation or directshow. Leave it on automatic unless the card misbehaves; some cards feel more responsive on directshow. Changes apply when you press apply, without restarting.

On PlayStation, turn off HDCP in the console's system settings, or the capture card gets a black picture.

Startup messages

MessageWhat to do
capture device busy or unavailableAnother app has the card open. Close OBS, Discord's camera, the card's own software or the Windows Camera app, then retry.
no frames from capture deviceThe card is open but sends nothing. Check the HDMI cable and that the console is on, turn off HDCP, or try another resolution or capture method.
No capture deviceNothing is picked or the card isn't plugged in. Pick it under capture.

Remote Play

Remote Play streams your PlayStation or Xbox to the PC, and Elixir sends your input back over the network. No adapter or capture card needed.

  1. Turn on remote play in your console's settings.
  2. On the config tab, set device to PS Remote Play or XBOX Remote Play.
  3. PlayStation: pair your console once under config › system › ps5 pairing. Xbox: sign in under xbox account with the code it shows, then pick your console.
  4. Press Connect PS5 or Connect Xbox. The stream opens inside the app.

Delay depends on your network. A wired connection to the console works best.

Profiles

A profile holds your button map, stick curves, deadzones and trigger settings. Create as many as you like, mark favourites with the star, and switch between them with a key bind.

Stick curves

Shape each stick's response by dragging a bezier curve or placing points. Changes apply live, so you can tune while you play.

Keybinds

Keybinds live under config › keybinds, on three pages: application keybinds, main keybinds and script keybinds.

  1. Click a bind box. It starts listening.
  2. Press a controller button, a key or a mouse button. Keyboard and mouse buttons work whatever output you use.
  3. Right-click a box to clear it.

While a box is listening, the key you press only sets the bind; it doesn't trigger anything else in the app or in Windows.

Keyboard & mouse

Elixir turns keyboard and mouse input into controller input for the console. Mouse movement drives the right stick; every key can be bound to any button. Keep separate keyboard & mouse profiles for each game under controller › kbm.

Microphone

Talk in PS5 party and game chat through Elixir, with noise cleanup, voice effects and a soundboard. The microphone page is under controller › microphone.

What you need

A second ESP32-S3 board (the same kind as the S3 adapter) flashed with the Elixir mic firmware from config › system › S3 firmware. Plug its native USB port into the PS5 and its COM port into your PC. The PS5 sees it as a USB microphone.

The three pages

  • talk: enable microphone, mute and push-to-talk, gain, pitch and microphone monitoring.
  • board: the soundboard. Volume, pitch and loudness match for clips, and your sounds. Clips play untouched by mic effects or mute.
  • system: noise suppression, noise gate, equalizer, and the input device, output device and serial port.

Mute from the app, a keybind, or the DualSense mute button.

Themes

Pick a theme under config, from flat ones like dark to animated ones. The colours on this site are the dark theme.

Acceleration pack

Open config › system and go to the page with this pc. It shows your CPU, GPU and driver and what Elixir recommends for them. Under ai runtime, each part has its own install and remove button, so you only download what your PC uses.

  • NVIDIA: the acceleration pack needs an RTX 20-series card or newer and driver 580 or newer. Elixir says so if your driver is too old.
  • AMD and Intel: Elixir uses DirectML instead. No NVIDIA pack needed.

"Building engine" on first run

The first time the pack loads a model on your GPU, it builds an engine tuned for that card. A notification shows while it builds; it can take a minute or more on slower cards. It only happens once per model; after that it loads fast.

Your data

Your settings live in %LOCALAPPDATA%\elx, not in the install folder, so reinstalling or updating never touches them.

FolderHolds
configsSettings, theme, sounds and sign-ins
profilesController remap and keyboard & mouse profiles
modelsModels and their cached engines
runtimeThe acceleration pack and other runtimes

Back up or move

Close Elixir, then copy the elx folder. To move to a new PC, copy it to the same place there before first launch. Skip runtime and the cached engines; Elixir downloads and rebuilds those for the new GPU.

Share a profile

Profiles are single files in profiles. Send the file; the other person drops it into the same folder.

Changelog

The newest version is always offered in the app under config › system › updates.

0.17.4

  • Newer AI runtime for NVIDIA cards: ONNX Runtime 1.31, TensorRT 10.16.1 and CUDA 13. Open config › system › ai runtime and press Update; the NVIDIA parts update together.
  • After the update, old CUDA 12 files and old TensorRT engines are cleared to free disk space. Each model builds its engine once on first load, which can take about a minute.
  • Voices in Downloads: one-click AI voices for the voice changer, converted inside the app with no Python needed.
  • Logging no longer holds up the frame, aim or controller threads when the disk is slow.

0.11.0

  • Scripts, rebuilt. Start in simple mode: pick a keybind, add steps or record them on your controller. Switch to the advanced editor any time for triggers, actions, conditions and a test page.
  • Triggers: press, release, hold, double and triple tap, button combos, stick and trigger travel, timers, and profile or device changes.
  • Logic: if/switch, loops, waits, timeouts, cooldowns, variables and math, plus starting or stopping other scripts.
  • Outputs: buttons, sticks and analog triggers, keyboard keys, typed text and the mouse wheel. Scripts can also load a config or swap profiles.
  • Vision conditions: react to what the detector sees on screen.
  • Recorder with a timeline: trim and loop a take before adding it.
  • Recipes, script parameters, and import or export to share scripts.
  • Test scripts in a sandbox with step-by-step debugging before they touch your controller.
  • OCR: drag the read region right on the preview.
  • Themes: star favourites to pin them to the top.

0.9.51

  • Elixir S3: lower input delay. Each report is now sent just before the console reads it instead of up to a full poll early, cutting S3-to-console time from about 1.3 ms to about 0.3 ms. Update the S3 firmware from the app after installing.

0.9.5

  • Titan Two and Cronus Zen outputs, with the controller read back from the device.
  • Elixir S3: found automatically on any COM port, with driver install and firmware flashing inside the app.
  • Xbox Remote Play beside PS Remote Play.
  • Local Output: virtual Xbox 360, DualShock 4 and DualSense controllers for PC games.
  • DirectShow capture method and screen capture.
  • Acceleration pack parts install and uninstall one by one.
  • Keyboard and mouse buttons can be used as keybinds in every mode.

Troubleshooting

The controller isn't detected

Try another USB port or cable. Close apps that grab the controller, such as Steam Input, DS4Windows or the device's own software, then unplug and replug it.

The S3 isn't found

Use the board's COM / UART port and a data cable. Under config › system › S3 firmware, install the USB driver if it's missing, and flash the firmware if it says the board needs it. If the port is busy, close any serial monitor or old Elixir window and restart Elixir.

Remote Play lags

Wire the console and the PC to your router, close downloads and streams, and pick a lower stream resolution.

Windows blocks the installer

If SmartScreen shows "Windows protected your PC", click More info and Run anyway. Elixir needs the administrator prompt to read your controller.

Notifications are noisy

Under config › system › notifications, turn off enable all notifications, then switch on only the kinds you want.

Still stuck?

Ask on Discord. Include your Windows version, controller and output, and attach elixir.log from Program Files\Elixir.

Link your license

No license is linked to this Discord account yet. Enter your key once and the download unlocks.

Get a key